Louroe-electronics AOP-SP70 User Manual

Browse online or download User Manual for Audio accessories Louroe-electronics AOP-SP70. Louroe Electronics AOP-SP70 User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 8
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Page 1 of 8
aopsp70_ inst_3/15
DESCRIPTION
MODEL AOP-SP70 AUDIO CONVERSION UNIT
Model AOP-SP70 is usually paired with the TLO to convert the signals of Model
TLO for compatibility with the receiving device for providing two-way audio. The
AOP-SP70 drives the audio signals into the audio input and output of the IP
Camera, etc, for transmission over the network and to an existing computer (or
other devices) at the receiving site. Person at the receiving site hears the audio
through the computer speaker or through a headphone. For talkback to the
remote site (TLO location), the computer’s microphone is used to transmit audio
back through the network to the AOP-SP70. It is then amplified and sent out to
the speaker portion of the remote TLO. The AOP-SP70 provides power to the
TLO and contains adjustments for microphone gain and speaker volume. A 12Vdc
power supply is included with the AOP-SP70.
MODEL TLO OUTDOOR SPEAKER/MICROPHONE
Model TLO is a two-way speaker and microphone and re-entry horn for high
volume penetration. Weatherized for outdoor applications, the microphone and
speaker horn are all within one housing. In operation, the TLO together with the
AOP-SP70 provides hands-free bi-directional audio communication with the audio
receiving device (DVR, IP Camera, etc.).
MODEL AOP-SP70
Speakerphone Conversion Unit
MODEL TLO
Outdoor Speaker/Microphone
WIRING REQUIREMENTS
3 Conductor consisting of:
+
2 Conductor shielded, 20 gauge
with 22 gauge drain
+
1 Conductor unshielded, 20 gauge
All in the same jacket
West Penn 358 or equivalent
WIRING REQUIREMENTS
4 Conductor consisting of:
+
2 Conductor shielded, 20 gauge
with 22 gauge drain (microphone
connection)
+
2 Conductor unshielded, 18 gauge
(speaker connection)
All in the same jacket
West Penn 356 or equivalent
FOR AOP-SP70
FOR TLO
AOP-SP70
SPEAKERPHONE CONVERTER
INSTALLATION AND OPERATING INSTRUCTIONS
6955 VALJEAN AVE, VAN NUYS, CA 91406
PH: (818)994-6498 / FAX: (818)994-6458
/ www.louroe.com[email protected]
®
LOUROE ELECTRONICS® 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX 994-6458
website: www.louroe.com e-mail: [email protected]
(818)
Page view 0
1 2 3 4 5 6 7 8

Summary of Contents

Page 1 - AOP-SP70

Page 1 of 8aopsp70_ inst_3/15DESCRIPTIONMODEL AOP-SP70 AUDIO CONVERSION UNITModel AOP-SP70 is usually paired with the TLO to convert the signals of Mo

Page 2 - POWER TAP SETTINGS OF TLO

WIRING REQUIREMENTS4 Conductor consisting of:+2 Conductor shielded, 20 gauge with 22 gauge drain (microphone connection)+2 Conductor unshielded, 18 g

Page 3 - POSITIONING TLO

WIRING DIAGRAM OF MODEL TLO OUTDOOR SPEAKER/MICROPHONEPOSITIONING TLOAfter TLO has been mounted to desired structure (wall, pole, etc.), horn should b

Page 4 - West Penn 358 or equivalent

CONNECTING TLO TO AOP-SP70 UNIT AND TO RECEIVING DEVICE (DVR, IP NETWORK CAMERA, ETC.)(Refer to Diagram on page 5) MICROPHONE CONNECTION OF AOP-SP70On

Page 5 - INTERCONNECTION DIAGRAM

EXTSPKR SPKRSPKREXTA B C CBA SPVdc+12GND+INTERCONNECTION DIAGRAMLOUROE MODEL AOP-SP70 SPEAKERPHONE CONVERSION UNIT,AND LOUROE MODEL TLO SPEAKER/MICROP

Page 6 - (818)

APPLYING POWER TO AOP-SP70AOP-SP70 requires 12Vdc, 500mA power. A 12Vdc power supply is included. Connect the stripped ends of the power supply to th

Page 7 - Page 7 of 8

INSTALLATION AND OPERATING INSTRUCTIONSPage 7 of 8LOUROE ELECTRONICS® 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498

Page 8 - MANUFACTURED

MANUFACTUREDIN THEWARRANTYLOUROE ELECTRONICS® warrants that at the time of shipment products manufactured by LOUROE ELECTRONICS® to be free of defects

Comments to this Manuals

No comments